HideWire
The Comparison Directions for Use Specifications Order Yours

Wired speed, for a house that wasn't built for it.

HideWire is a fibre line thin enough to disappear against a wall, fast enough for gaming, streaming, and everything Wi-Fi struggles with. Easy to install and upon removal, leaves no marks.

Order via Amazon

How HideWire actually compares

A Comparison of the Principal Methods of Connecting a Room
HideWire Powerline Ordinary Ethernet Wireless
Latency Stead 0-1ms Intermittent 2-10ms Steady 0-1ms Unstable 2-5ms
Speed 2.5Gbps x4 Avg: 250Mbps Hardware Limited Wifi6/7: 400-900Mbps
Wifi: ~100Mbps
Visibility Flush against the wall Two plug sockets Large diameter cable Over the air
Impact About an hour to fit and peels off clean if need be leaving no trace Quick to plug in, but a nightmare to pair with no guarantee of speed of performance Straightforward to fit, but unsightly to see if not within the walls Nothing to fit or remove, nor nothing tangible to rely upon

Directions for Use

No drilling or plaster disturbed

  1. Measure the run

    Unspool the length required between the router and the desk, chair, or console in question.

  2. Place the fasteners

    Press the clear mounting dots along the skirting or wall, at intervals of some six to eight inches.

  3. Lay the conductor

    Press the cable into each fastener until it sits close enough to the wall to trouble no one's eye.

  4. Connect both ends

    One end to the router, the other to the device. Any excess length may be coiled into the housing provided.

Placeholder photograph of the mounting dots along a wall
Fig. 2 — The Mounting Fasteners, Shown at Regular Interval
Placeholder photograph of the cable-tidy end housing
Fig. 3 — The End Housing, Storing the Surplus Conductor

Certificate of Specification

Set down here, in full, for the satisfaction of the technically minded.

Particulars of the Apparatus

Fibre type
G657.B3, bend-insensitive, single-mode
Conductor diameter
Approximately 0.9mm
Length supplied
30 metres per kit
Terminations
SC/UPC, fitted and tested at manufacture
Mounting
Clear, removable fasteners
Storage of surplus
Housing fitted at each end
Suited to
Gaming apparatus, the home office, and the parlour television

To Place an Order

❦
£80 per kit
  • 30 metres of HideWire conductor, terminated both ends
  • A full complement of mounting fasteners
  • Two end housings, for the tidy storage of surplus
  • Printed directions for use
  • Delivery, free of charge, within the United Kingdom
Order via Amazon

(Amazon listing link to be substituted once the product page is live.)